BEKO TECHNOLOGIES DRYPOINT HL 3400

Two adsorption vessels alternate between drying and heatless regeneration. Desiccant captures moisture; part of the dried air regenerates the second vessel. Pre-filters protect against oil and liquid water, while an after-filter captures dust. Oil-lubricated screw compressors require suitable fine filtration.

The stated flow is the manufacturer’s rated capacity, not a guaranteed net air supply downstream of the dryer. Regeneration consumes compressed air. Compressor kW is indicative only; suitability and usable flow depend on pressure, temperature, dew point and manufacturer correction factors. −70 °C is optional. Install the dryer within its permitted ambient temperature range.

Capacity at 7 bar(g), +35 °C inlet temperature, saturated inlet air and −40 °C pressure dew point; flow referred to +20 °C and 1 bar(a).

Standard maximum 10 bar; 16 bar only with a confirmed optional configuration.

Dimensions and weight are approximate for the stated configuration.

The illustration is based on the manufacturer’s product family with a PEMA RENTAL sticker. Details of the actual configuration may vary.

Manufacturer technical documentation · Manufacturer technical documentation (PDF)