BEKO TECHNOLOGIES DRYPOINT ACM 485
BEKO DRYPOINT ACM 485 · 14.17 m³/min · −40 °C
This is a typical model in this power category. The rental company will confirm a specific machine for your requested term.
BEKO TECHNOLOGIES DRYPOINT ACM 485 – popis modelu
Two adsorption vessels alternate between drying and heatless regeneration. Desiccant captures moisture; part of the dried air regenerates the second vessel. Pre-filters protect against oil and liquid water, while an after-filter captures dust. Oil-lubricated screw compressors require suitable fine filtration.
The stated flow is the manufacturer’s rated capacity, not a guaranteed net air supply downstream of the dryer. Regeneration consumes compressed air. Compressor kW is indicative only; suitability and usable flow depend on pressure, temperature, dew point and manufacturer correction factors. −70 °C is optional. Install the dryer within its permitted ambient temperature range.
Rated capacity from the current BEKO table; configuration conditions and net flow are confirmed during selection.
The illustration is based on the manufacturer’s product family with a PEMA RENTAL sticker. Details of the actual configuration may vary.
Technické parametry BEKO TECHNOLOGIES DRYPOINT ACM 485
- Rated inlet flow14.17 m³/min (850 m³/h)
- Pressure dew point−40 °C
- Operating pressure4–16 bar
- Indicative compressor power23–45 kW
- RegenerationHeatless, consumes compressed air
- Air connection2″
- Maximum inlet temperature+50 °C
- Ambient temperature+4…+50 °C
- Power supply230 V
- Electrical power consumptionMax. 40 W
- Ingress protectionIP54
Pronájem BEKO TECHNOLOGIES DRYPOINT ACM 485
Select the rental date in the category Desiccant air dryer 12 m³/min. You can specify a preference for this model in your inquiry.
Request a price