BEKO TECHNOLOGIES DRYPOINT HL 2600
BEKO DRYPOINT HL 2600 · 43.33 m³/min · −40 °C
This is a typical model in this power category. The rental company will confirm a specific machine for your requested term.
BEKO TECHNOLOGIES DRYPOINT HL 2600 – popis modelu
Two adsorption vessels alternate between drying and heatless regeneration. Desiccant captures moisture; part of the dried air regenerates the second vessel. Pre-filters protect against oil and liquid water, while an after-filter captures dust. Oil-lubricated screw compressors require suitable fine filtration.
The stated flow is the manufacturer’s rated capacity, not a guaranteed net air supply downstream of the dryer. Regeneration consumes compressed air. Compressor kW is indicative only; suitability and usable flow depend on pressure, temperature, dew point and manufacturer correction factors. −70 °C is optional. Install the dryer within its permitted ambient temperature range.
Capacity at 7 bar(g), +35 °C inlet temperature, saturated inlet air and −40 °C pressure dew point; flow referred to +20 °C and 1 bar(a).
Standard maximum 10 bar; 16 bar only with a confirmed optional configuration.
Dimensions and weight are approximate for the stated configuration.
The illustration is based on the manufacturer’s product family with a PEMA RENTAL sticker. Details of the actual configuration may vary.
Manufacturer technical documentation · Manufacturer technical documentation (PDF)
Technické parametry BEKO TECHNOLOGIES DRYPOINT HL 2600
- Rated inlet flow43.33 m³/min (2600 m³/h)
- Pressure dew point−40 °C
- Maximum working pressure10 bar
- Indicative compressor power91–132 kW
- RegenerationHeatless, consumes compressed air
- Air connectionDN100
- Maximum inlet temperature+50 °C
- Ambient temperature+5…+50 °C
- Power supply85–264 V AC / 50–60 Hz
- Ingress protectionIP54
- Dimensions (height × width × depth)2490 × 1850 × 1200 mm
- Weight1800 kg
Pronájem BEKO TECHNOLOGIES DRYPOINT HL 2600
Select the rental date in the category Desiccant air dryer 40 m³/min. You can specify a preference for this model in your inquiry.
Request a price