Typical models

We offer the following models in this category. The dispatcher will confirm the specific machine for your date.

Mikropor MKE-PRO 2500

Mikropor MKE-PRO 2500: kondenzační sušička, 41,67 m³/min (2500 m³/h), tlakový rosný bod +3 °C za referenčních podmínek.

Jmenovitý průtok: 41,67 m³/min (2500 m³/h)
Pressure dew point: +3 °C
Provozní tlak: 4–16 bar
Reference pressure: 7 bar
Reference inlet temperature: +35 °C

BEKO TECHNOLOGIES DRYPOINT RA III 2400 AC

BEKO TECHNOLOGIES DRYPOINT RA III 2400 AC: kondenzační sušička, 40 m³/min (2400 m³/h), tlakový rosný bod +3 °C za referenčních podmínek.

Jmenovitý průtok: 40 m³/min (2400 m³/h)
Pressure dew point: +3 °C
Provozní tlak: 4–16 bar
Reference pressure: 7 bar
Reference inlet temperature: +35 °C

Model details →

Atlas Copco FD 760

Atlas Copco FD 760 · 45,6 m³/min · +3 °C

Jmenovitý vstupní průtok: 45,6 m³/min (2 736 m³/h)
Pressure dew point: +3 °C
Maximální pracovní tlak: 14 bar
Připojení vzduchu: DN100
Tlaková ztráta: 0,17 bar

Model details →

PŮJČOVNA / Sušící jednotky

Refrigerated air dryer 40 m³/min

Mikropor MKE-PRO 2500 BEKO TECHNOLOGIES DRYPOINT RA III 2400 AC Atlas Copco FD 760

This 40 m³/min class refrigerated dryer removes moisture from compressed air, helping protect pneumatic tools, pipework and production equipment against condensate and corrosion. Use it as a temporary replacement during servicing or to expand a compressor station. It is an indicative match for 91–132 kW screw compressors. Each Mikropor MKE-PRO, BEKO DRYPOINT or Atlas Copco FD model has its own rated capacity; selection must be checked against actual flow, pressure and inlet temperature. Standard pressure dew point is +3 °C at reference conditions.

Performance / flow rate: 40–45.6 m³/min
Working pressure: Depending on model, max. 14 bar
Pressure dew point: +3 °C
Indicative compressor power: 91–132 kW
Reference pressure: 7 bar
Reference inlet temperature: +35 °C
Reference ambient temperature: +25 °C
Drying method: Refrigeration

Compressor power in kW is indicative only. Capacities apply at 7 bar, +35 °C inlet temperature, +25 °C ambient temperature and +3 °C pressure dew point. Other conditions require manufacturer correction factors; capacity reserve does not replace this calculation. We confirm the model, filtration and connections before rental.

AVAILABILITY ON REQUEST

Availability by branch

Czech Republic

PraguePending verification

ModleticePending verification

PelhřimovPending verification

BrnoPending verification

Hradec KrálovéPending verification

OstravaPending verification

LovosicePending verification

Slovakia

BratislavaPending verification

KošicePending verification

Austria

ViennaPending verification

Poland

KatovicePending verification

PRICE FROMOn requestAll prices are listed without VAT.

The price has not been set. Please send us an enquiry to order.

Request a price

OrderYou select the date, transport, and submit your order.
Dispatch will confirmWe will confirm machine availability, price, and handover.
Machine is on its way to youWith registration and approved invoice payment, we can dispatch the machine immediately after confirmation. In other cases, we will first send you a prepayment request.

Need advice on the selection?

+420 601 500 800

What is included in the rental

At handover, we explain how to operate the equipment and provide the standard equipment for the particular machine or accessory.

Documentation and manualDocumentation and operating manual for the rented equipment.
Transport documentsDocuments required for transport, as applicable to the particular equipment.
Operating fluids for topping upFluids for routine topping up, according to the machine type.

Fuel: full tank at collection and return

We hand over machines with combustion engines with a full tank, and they must be returned with a full tank. If fuel is missing on return, we will top it up and charge for the fuel supplied.

Premium Cover

For an incident covered by the active service, you pay no excess. PEMA covers the cost of repairing or replacing the destroyed or stolen machine.

No excess for covered incidents
Theft, damage, fire and vandalism
PEMA handles the incident

The agreed scope and security requirements apply. Incorrect operation and neglected maintenance are not covered.

Premium Cover cannot currently be arranged online for this region. Please check coverage options with our dispatch team.

Service details

Premium Service 24/7

For a normal technical breakdown, we come to the agreed operating site. Technician travel, out-of-hours assistance and any machine exchange with transport are included.

Service visits included
Machine replacement included
24/7 emergency assistance

Also applies when you collect the machine yourself. Replacement depends on availability; 24/7 does not guarantee immediate arrival.